|
Question:High-speed driving or rough roads cause the mirror to shake violently
|
|
Answer:Please use low-strength screw glue on all accessories screws, which can increase the rigidity of the screws and reduce vibration
 |
| Question:Mirror mounts interfere with the use of long clutch and brake levers |
|
Answer:You can install the mirror from the bottom, and then adjust the position. Or you can replace the short lever  |
| Question:Expansion sleeve adapter loose |
Answer:Use electrical tape (or other tape) to wrap the sleeve
 
|
| Question:how you want to mount on the original bar end weight |
|
Answer:Use electrical tape (or other tape) to wrap the sleeve  |
| Question:The bracket of mirror will affect the use of the throttle grip |
|
Answer:You can adjust the position or cut the excess grip or Use spacers to increase spacing
|
|
Question:How to install Honda Rebel1100 CMX1100 And Rebel1100T CMX1100T? |
|
Answer:After removing the original bar end weight, add a shim to the right throttle grip to increase the gap so that the mirror will not get stuck on the grip. |
| Question:How to install Yamaha MT03 and MT25 and FZ25 |
Answer:After removing the original bar end weight, add a shim to the right throttle grip to increase the gap so that the mirror will not get stuck on the grip.  |
| Question:How to install Yamaha YZF-R3 and YZF-R25 and YZF-R15 and XSR125 and XSR155 |
|
Answer:There are 2 installation options Plan1:you need to remove the rod inside the original handlebar Youtube video link:https://www.youtube.com/watch?v=105yLtRGBWM&list=PLACGCq4SoNuvqR3bq72L62rgiT0tFdqyM&index=2
Plan2:you need to remove the rod inside the original handlebar, and then use the expansion sleeve to install, you can refer to this youtube video and photo. Youtube video link:https://www.youtube.com/watch?v=ecXDwtcfbkg
|
Question:How to install kawasaki Z650 and Ninja650
|
| Question:801-0374 model How to install kawasaki model |
|
Answer:There are 2 installation options 1.you can use our adapter(801-0370) 2.Please prepare 4-5 pieces of washers by yourself.Remove the original bar end weights, then install the mirrors and washers, then install the original weights  
|
| Question:How to install Honda CB and CBR model |
|
Answer:There are 2 installation options Plan1:you need to remove the rod inside the original handlebar Remove the metal clips from the original pole Then push the rod to handlebar deeper leaving a gap of 4-5CM at the end of handlebar and then use the “Installation method 1 or 2” you can refer to this video and photo Youtube video link:https://www.youtube.com/watch?v=105yLtRGBWM&list=PLACGCq4SoNuvqR3bq72L62rgiT0tFdqyM&index=2
Plan2:you need to remove the rod inside the original handlebar, and then use the expansion sleeve to install, you can refer to this youtube video and photo. Youtube video link:https://www.youtube.com/watch?v=BgkFub-SvlY&list=PLACGCq4SoNuvqR3bq72L62rgiT0tFdqyM&index=3
|
| Question:How to install mirrors on Sportster S and nightster 975 |
|
Answer:Remove the original mirror,keep the black fitting with screw holes and then install it using our adapter(801-0399).
|
| Question:How to install mirrors on Indian Scout bobber and Scout rogue and Sport scout and 101 scout |
|
Answer:Please uninstall the original mirror, keep the original silver adapter, and then install our mirror
|
