|
Question:High-speed driving or rough roads cause the mirror to shake violently
|
|
Answer:Please use low-strength screw glue on all accessories screws, which can increase the rigidity of the screws and reduce vibration
 |
| Question:Mirror mounts interfere with the use of long clutch and brake levers |
|
Answer:You can install the mirror from the bottom, and then adjust the position. Or you can replace the short lever  |
| Question:Expansion sleeve adapter loose |
Answer:Use electrical tape (or other tape) to wrap the sleeve
 
|
| Question:how you want to mount on the original bar end weight |
|
Answer:Use electrical tape (or other tape) to wrap the sleeve  |
| Question:The bracket of mirror will affect the use of the throttle grip |
|
Answer:You can adjust the position or cut the excess grip or Use spacers to increase spacing
|
Question:How to install kawasaki Z650 and Ninja650
|
| Question:801-0374 model How to install kawasaki model |
|
Answer:Please prepare 4-5 pieces of washers by yourself.Remove the original bar end weights, then install the mirrors and washers, then install the original weights  
|
| Question:How to install Honda CB and CBR model |
|
Answer:There are 2 installation options 1.you need to remove the rod inside the original handlebar, and then use the expansion sleeve to install, you can refer to this youtube video and photo. Youtube video link:https://www.youtube.com/watch?v=ecXDwtcfbkg
2.You can use our Honda special adapter, but you need to take out the balance bar that fixes the inside of the original handlebar first, please use super gel or other super glue on the outside of the balance bar to fix the balance bar inside the handlebar and keep it , so that the mirror no longer rotates.  |
