Question:High-speed driving or rough roads cause the mirror to shake violently
|
Answer:Please use low-strength screw glue on all accessories screws, which can increase the rigidity of the screws and reduce vibration
|
Question:Mirror mounts interfere with the use of long clutch and brake levers |
Answer:You can install the mirror from the bottom, and then adjust the position. Or you can replace the short lever |
Question:Expansion sleeve adapter loose |
Answer:Use electrical tape (or other tape) to wrap the sleeve
|
Question:how you want to mount on the original bar end weight |
Answer:Use electrical tape (or other tape) to wrap the sleeve |
Question:The bracket of mirror will affect the use of the throttle grip |
Answer:You can adjust the position or cut the excess grip or Use spacers to increase spacing |
Question:How to install kawasaki Z650 and Ninja650
|
Question:801-0374 model How to install kawasaki model |
Answer:Please prepare 4-5 pieces of washers by yourself.Remove the original bar end weights, then install the mirrors and washers, then install the original weights |
Question:How to install Honda CB and CBR model |
Answer:There are 2 installation options Plan1:you need to remove the rod inside the original handlebar Remove the metal clips from the original pole Then push the rod to handlebar deeper leaving a gap of 4-5CM at the end of handlebar and then use the “Installation method 1 or 2” you can refer to this video and photo Youtube video link:https://www.youtube.com/watch?v=105yLtRGBWM&list=PLACGCq4SoNuvqR3bq72L62rgiT0tFdqyM&index=2
Plan2:you need to remove the rod inside the original handlebar, and then use the expansion sleeve to install, you can refer to this youtube video and photo. Youtube video link:https://www.youtube.com/watch?v=BgkFub-SvlY&list=PLACGCq4SoNuvqR3bq72L62rgiT0tFdqyM&index=3 |
Question:How to install mirrors on Sportster S and nightster 975 |
Answer:Remove the original rearview mirror.Then install it using our adapter(801-0399). |