Fenrir Motorcycle Shift Linkage User Manual

How To Remove The Original Shift Linkage
1.Use an wrench to hold position A, then use another wrench to loosen locknut B before removing the shift linkage.
2.Use an wrench to loosen position C, then remove the linkage.

How To Adjust Fenrir Shift Linkage
Loosen the locknuts and adjust the Fenrir shift linkage to match the exact eye-to-eye length of the stock rod you just removed. Once perfectly aligned, re-tighten the locknuts securely.
（You can adjust it further to perfectly match your personal needs and riding preferences.）

How To Installation Fenrir Shift Linkage
1.Rear Mount Installation
Apply a few drops of medium-strength threadlocker to the threads of the cap screw. Insert the bolt through the rear rod end Heim joint and thread it directly into the rear shifter lever.
2. Front Mount Installation
Position the front rod end on the Inside of the front shifter lever,Add the gasket. Apply medium-strength threadlocker to the cap screw, then secure the linkage to the lever using the bolt and acorn nut. Tighten all hardware securely.